Overview
Liberon Superior Protection Woodstain has been specially designed to protect and decorate exterior woods exposed to bad weather conditions and UV. It is highly water repellent, whilst its microporous formulation allows the wood to breathe, and comes with an 8 year guarantee.
- Quick drying
- 8 year guarantee
- Tough durable weather protection
- Water repellant and UV resistant
- 2 coat application
| Area | Interior & Exterior |
| Recommended Use | Vertical woodwork such as cladding, doors, windows, gates, pergolas, fence, beams... |
| Base | Water-Based |
| Coverage | Up to 12m² per litre |
| Drying Time | 12 Hours |
| Re-Coat Time | 3 Hours |
| Recommended Coats | 2 Coats (3 Coats for new or exposed woods) |
| Application Method | Brush, Roller or Spray |
| VOC Levels | Low |
| Clean Up | Clean tools with water. Remove as much of the woodstain as possible from the tools after use. Do not dispose of residues and washing water/solvents in the sink, toilet, sewer, bin, in order to avoid discharge into the environment. |
Preparation
The wood to be stained must be clean, dry, in good condition and not greasy. Sand the corners and edges to round them slightly.
- BARE OR REFURBISHED WOOD : Sand with sandpaper to obtain a smooth surface and remove dust. Apply a suitable wood treatment product.
- EXOTIC WOODS eg. OAK, CHESTNUT : Dilute the 1st coat with 10% water and apply a second non-diluted coat. On greasy woods, degrease the surface with acetone.
- STAINED WOODS : Brush to remove any loose or flaking finishes. Use sandpaper to obtain a smooth surface and remove dust.
Application
Ideal application conditions are between 12° and 25°C, in dry, wind free weather.
- Stir the product well before and during use using a wide stirrer.
- Apply in 2 coats. For a spray application, dilute with 10% water
Do not apply to thermo-heated, thermo-treated or acidic woods.
For bright colours on new or exposed woods, it may be necessary to apply a 3rd coat.
The clear shade is recommended only for renewal on previously stained and tinted woods or only to dilute other colour shades.
Results may vary according to wood species. Always test product on a small or inconspicuous area for colour, compatibility and end result.
Always follow manufacturer's instructions found on the tin
